Our nationwide service facilities deliver technical support, preventative maintenance, calibration and fast repairs. The design features no mold parting-line where the tubing is secured, which can be a source of leaks. Equipments, Analytical Instrumentation / Analytical Equipment, Medical Equipment Sterilization Equipments, Blood Transfusion, Dialysis and Extracorporeal Circulation Equipments, Medical Examination and Monitoring Equipments, Respiration, Anesthesia and First Aid Equipments, Obstetrics and Gynecology, Assisted Reproduction, Contraceptive Devices, Neuro and Cardiovascular Surgery Instruments, Infusion, Nursing and Protective Equipments, Non-Active Implantable Medical Device Testing, Active Implantable Medical Device Testing, Implantation with Histopathology Tests (ISO 10993-6 & ISO 10993-12), Risk Assessments (ISO 10993-1 & ISO 10993-17 & ISO 14971), Subacute & Subchronic Toxicity (ISO 10993), Acute Systemic Toxicity & Pyrogenicity (ISO 10993-11 & ISO 10993-12), Biocompatibility Evaluation of Breathing Gas Pathways in Medical Devices (ISO 18562), Material Characterization Screens of Raw Materials, Medical Device Biological Indicator-Sterility Testing, Biological Indicator-Population Verification, Microbial Identifications & Strain Typing, Rapid Endotoxin Testing for Medical Devices, Electromagnetic Compatibility (EMC) Testing, Transportation and Distribution Simulation Studies, Medical Devices Single Audit Program (US, AUS, BR, CAN & JPN), Protective Barriers & Material Performance, Bacterial & Viral Filtration Efficacy (BFE/VFE) Test, Partible Filtration Efficiency (PFE) Test. These items are not eligible for self-return. They also can be integrated into other pre-qualified 3rd party pumps & monitors. PendoTECH's Single Use Pressure Sensor accurately and economically measures static and kinetic pressures of gases and fluids in biopharmaceutical processes. The methods used to make this claim for single-use pressure sensors are shown in, terials, during a continuous process of up to, 90 days, the susceptibility of the sensor to. We don't support landscape mode yet. For lowest pressure applications, there is a Transmitter device with a 4-20 mA range of 0-2 psi. HW$82X&saF9##-=5|=i/nt/Eq/'=g=v^.ez:k=M The full test procedure and results are available by contacting PendoTECH, but an overview of the test is presented at the end of this article. Battery operated - uses 9v battery (approximate 14 hours of power). Stay in touch with us for the freshest products! The complete range of sizes is shown in Figure 1. Learn more about returning seller fulfilled items. Another challenge of incorporating single-use sensors into a GMP process is the closed nature of the bioprocess system and associated single-use manifold. It is highly advantageous to be able to conduct these tests with a single-use pressure sensor, preinstalled on the bag/manifold, so that sterility is not compromised during this test. Returning Products with Inspect & Buy label, Price includes custom duties and all other applicable taxes. Please go back to portrait mode for the best experience. We're sorry! No calibration required when used with the pressure sensors (the standardized sensor output signal is read). Dedicated to the success of your entire fluid path from research to production since 1955. Please try again. This rate value would go up or down proportionately with larger or smaller containers. Online product catalogs, news, articles, events, publications & more. During a potential test, you could expect to see a potential fluctuation of 0.003 psi from the PMAT-HR corresponding to a value of 20 mL/min during the test that would not be interpreted as a leak. For single-use sensors to be viable in a commercial continuous processing facility they must be made of highly durable materials and be available in smaller sizes than sensors traditionally used in large batch processes. No tare of the sensors was conducted post-exposure. Environmental XPRT is a global environmental industry marketplace and information resource. If you do not receive a response from the seller for your return request within two business days, you can submit an A-to-Z Guarantee claim. Using a low-pressure test pump in conjunction with the Crystal XP2i (from Ametek) high-accuracy pressure test gauge, the sensors were subjected to vacuum at 0.50, 0.25, and 0.10 psi, and then pressurized to 0.05, 0.10, 0.15, 0.20, 0.25, 0.50, 1.00, and 2.00 psi. Finally, there is a full range 0-60 psi Transmitter available. - If your return is due to an Amazon error you'll receive a full refund, else the shipping charges (onward & return) along with import fees will be deducted from your refund amount. In summary, PendoTECH single-use sensors are robust enough to be considered for qualification in GMP processes. Mark Marrano Biopharmaceutical Applications Engineer PendoTECH S ;LH>T* This push toward continuous manufacturing, coupled with the benefits of single-use technology, creates demand for single-use sensors that have proven performance during long-term use. The data presented here indicate that using the PMAT-HR monitor with PendoTECH single-use pressure sensors provides excellent experimental results for high-accuracy pressure measurement in the range of 0.500 to 2.000 psi. Figure 2. The full test procedure and results are available by contacting PendoTECH, but an overview of the test is presented at the end of this article. It is critical to ensure the integrity of disposable bags prior to use in processing. Energy XPRT
The growth of continuous processing coupled with the benefits of single-use technology creates demand for single-use sensors that have proven performance during extended use. This ZOS factor would need to be considered for any test design. The growth of continuous processing in the bioprocess industry is driving demand for sensors that can be used reliably for extended periods of time with no degradation in sensor performance. Tables C & D report the testing results after applying a known pressure/vacuum to each sensor from one lot exposed to both irradiation levels. Refunds are applicable only if determined that the item was not damaged while in your possession, or is not different from what was shipped to you. This item is eligible for free replacement, within 10 days of delivery, in an unlikely event of damaged, defective or different item delivered to you. PendoTECH conducted tests to demonstrate the effectiveness of the PMAT-SHR, and single-use pressure sensors, to measure extremely low pressures after gamma irradiation. As this photo indicates, these sensors are available in a range of sizes. Privacy, Our sites:
Unable to add item to Wish List. 12-ft (3.7 m) re-usable sensor to monitor cable. After 93 days exposure to 10 psi, the pressure sensors remained accurate. Integration to Higher-Level Process Control Systems. 2022 Masterflex, LLC. They are available in corrosion-resistant polysulfone to withstand the disinfection process. We encountered an error while updating this page. Our disposable pressure sensor is rugged so that can be repeatedly cleaned. =(0.003 psi 1,000 L)/(10 min 14.7 psi) The method in which PendoTECH monitors communicate with higher-level control systems will also be discussed. 1996-2022, Amazon.com, Inc. or its affiliates. Requirements for Use in Continuous Processing. Sensors are single-use and suitable for gamma irradiation. Sensor Type, Materials, and Accuracy, Single-Use Sensor: Materials of Construction, Sizes, and Technology. Any use of PendoTECH single-use sensors for greater than 90 days should be evaluated by the end user before incorporating into their process. GEN Genetic Engineering and Biotechnology News, Supplement: Single-Use Pressure Sensors for Continuous Processing and Leak Testing, The growth of continuous processing in the, bioprocess industry is driving demand for sen, sors that can be used reliably for extended, periods of time with no degradation in sensor, performance. The seller will arrange the return pick up for these items. PendoTECH Pressure Sensors for Smaller Scale Processes. ID, 2.5 m long, Mobius MIX100 single-use mixing assembly with needle-free sample ports and 4 in. Tables A & B present information gathered during testing as well as post-experiment sensor verification, demonstrating sensor performance versus a calibrated gauge. Pressure sensors feature a max pressure for 75 psi, with the DPG monitor having an accuracy rating of up to 30 psi. Environmental XPRT is part of XPRT Media All Rights Reserved. Because of the lower flow rates and smaller working volumes found in some continuous processes, relative to traditional batch operations, small ID tubing and associated sensors are desired to increase linear velocity inside the tubing, promoting uniform flow and preventing settling from occurring. that PendoTECH sensors are durable enough to meet the demands of continuous processing with no loss in performance compared to more traditional, nondisposable technologies. For potential use in a pressure-hold/leak-test application, the contribution of the 0.003 psi ZOS can be calculated by the following example. Please make sure that you've entered a valid question. But digital communication protocols are becoming increasingly popular as production facilities continue to grow more sophisticated. Jim Furey General Manager PendoTECH, PendoTECHs Durability and Accuracy Key to Using Single-Use Sensors for Extended Periods of Time and for Sensitive Applications. The return timelines for seller-fulfilled items sold on Amazon.in are equivalent to the return timelines mentioned above for items fulfilled by Amazon. To meet these requirements, PendoTECH single-use pressure sensors are available with 1/8-inch hosebarb specifically designed for flow rates less than 15 mL/min. There was a problem completing your request. Note: For seller fulfilled items from Books, Movies & TV Shows categories, the sellers need to be informed of the damage/ defect within 14 days of delivery. Generally, this manifold arrives presterilized, and thus calibration cannot be done at time of use without compromising the sterility of the system. It is also inexpensive so that can be used for single-use applications. Please try again later. Minimum / maximum pressure display buttons. Note: Please notify us if you found a problem with this document: Ordering Information*^ LUER ORDERING INFO PRESS-S-000 Single Use Pressure Sensor, polycarbonate, with luer - Sterile PREPS-N-000 Single Use Pressure Sensor, non-sterile, polysulphone, with luer, Shoes, Sensor, Flange, Sanitary, Abbr, Hose barb amp sanitary flange sensors, MODEL NUMBER NUMBER OF INPUTS NUMBER OF OUTPUTS OUTPUTS PMAT-S* 1 2 1 Relay / 1 Analog PMAT-SHR* 1 2 1 Relay / 1 , Monitor, Sensor, Pressuremat tm sensor monitor, Pressuremat, Biocompatibility All materials in contact with product fluid path meet USP Class VI requirements, both pre and post gamma irradiation Regulatory and Compliance Testing USP Class VI USP 661 ISO 10993-5 Bioburden, MODEL NUMBER NUMBER OF INPUTS NUMBER OF OUTPUTS OUTPUTS PMAT-S* 1 2 1 Relay / 1 Analog PMAT-SHR* 1 2 1 Relay / 1 Analog PMAT2 2 4 2 Relays / 2 Analog or 4 Relays, Monitor, Sensor, Pressuremat tm sensor monitor, Pressuremat, Pendotech, Modern search engine that looking for books and documents around the web. In this experiment, 30 sensors were randomly selected from three separate lots and exposed to two different levels of gamma irradiation: 27.533 kGy (low) and 4045 kGy (high). The Pressure Sensor Cable comes wired to the card for quick and convenient installation. All product contact components used in PendoTECH single-use pressure sensors are designed and have been tested to withstand continuous use of up to 90 days. We couldn't find any matches. In addition to examining the impact of time and type of exposure of the sensor materials, during a continuous process of up to 90 days, the susceptibility of the sensor to measurement drift/change in calibration was examined.